Agricover Lomax 20-ON Jeep Gladiator 5' Box Cover
Agricover Lomax 20-ON Jeep Gladiator 5' Box CoverFeatures
- The LOMAX Professional Series sits less than half an inch above the bed. Weighing in at roughly 60 lbs, the Professional Series can handle up to 500 lbs of evenly distributed weight, thanks to the extruded aluminum frame.
- To open the cover, pull the cord from either side of the bed to disengage the cover from the latches. To close the cover, use the built-in handle to fold the cover shut. As the cover closes, it will engage at ten points to lock the cover and protect your cargo.
- LOMAX features a water-shedding design with weather resistant, reinforced hinges that channel water away from the bed without gutters or drains. The cover overlaps the bed rails with a continuous seal along the side rails, which keeps weather and debris from entering the truck bed.
- Install the rails with eight no-drill, TIGHT BITE Clamps. Slide the front of the cover forward to engage the hooks, then lower into the retainment brackets. To remove, fold the cover open and secure the storage clamps.
- Then, disengage the hooks by pulling the latch on the front of the cover and lift the cover up.