The HS-788HB sail winch servo with its large drum wheel has 3 1/2 revolutions of travel for hauling in even the largest of sails. With its dual ball bearing supported output shaft and 25 tooth spline, the HS-788HB will provide years of reliable service.Features:Large Drum Wheel with 3.5 Revolutions of Travel25-Tooth Output SplineStrong Karbonite Gear TrainDual Ball Bearing-Supported Output ShaftWater and Dust-Resistant CaseSpecifications:Operating Voltage Range: 3.5 ~ 6.8VVoltage: 4.8V / 6.0VNo Load Speed: 1.68sec/360deg / 1.38sec/360degStall Torque: 11.0kgf-cm (152.76 oz-in) / 13.2kgf-cm (183.31 oz-in)Peak Efficiency Torque: 2.2kgf-cm (30.6 oz-in) / 2.6kgf-cm (36.1 oz-in)Standing Current: 8mA / 8mANo Load Running Current: 230mA / 250mAStall Current: 1,500mA / 1,800mADeadband: 5us / 5usConnector Wire Length: 300mm (11.811 in.)Connector Wire Gauge: 22AWGDimensions: 59.0 x 29.0 x 50.0mm (2.323 x 1.142 x 1.969 in.)Weight: 110.0g (3.880oz)Motor Type: Cored Metal BrushBearing Type: 2 Ball BearingCase Material: Engineering PlasticGear Material: 4 Heavy Duty GearsHorn Gear Spline: 25T (6.0)IP-Rating: IP54Servo Amplifier Type: Analog Controller
