Hot Racing light weight hardened steel 75 tooth, 48 pitch spur gear for the Traxxas Bandit, 2WD Slash, Rustler, 2WD Stampede, and Telluride vehicles.
Comes with the following:
- One (1) 75 tooth 48 pitch spur gear
- Three (3) mounting screws
- Three (3) green anodized countersunk washers
- Three (3) washers (use as needed underneath countersunk washers to prevent screw ends from protruding too far through spur mounting plate)
- Consider using Hot Racing motor lock plate TE18L06 for secure motor mounting
- Motor should no way exceed 180F (over 160F is not recommended). ESC should not exceed 160F. Excessive temperatures will shorten the life of the motor and ESC.Number of Teeth: 75 Gear Pitch: 48 pitch Mounting Holes: 3 Tooth Face width: ~5mm
Comes with the following:
- One (1) 75 tooth 48 pitch spur gear
- Three (3) mounting screws
- Three (3) green anodized countersunk washers
- Three (3) washers (use as needed underneath countersunk washers to prevent screw ends from protruding too far through spur mounting plate)
- Consider using Hot Racing motor lock plate TE18L06 for secure motor mounting
- Motor should no way exceed 180F (over 160F is not recommended). ESC should not exceed 160F. Excessive temperatures will shorten the life of the motor and ESC.
Specifications:
