Hot Racing Twister Blower Ball bearing 7 blade 40x40x28mm large cooling fan for custom cooling needs, or as a replacement for the Hot Racing AON404TP Monster Blower Fan cooling system.
This is the Hot Racing Twister Blower clip-on universal heat sink and fan for the 1/8, 1/7 Arrma Felony, infraction limitless, mojave . Kraton BLX, Notorious BLX, Outcast BLX, Senton BLX, Talion BLX, and Typhon BLX or custom projects.
Features:
- 12, 000 RPM Forced airflow over motor heat sink to increase cooling for improved efficiency and performance
- Large 40x40x28mm 7-blade fan
- Clip-on design for simple installation
- Black anodized aluminum heat sink provides efficient heat transfer
- Adapter with EC5
- 12AWG and 24 AWG silicone wire
Requirements:
- Installation
- Recommended to loosen fan screws during installation, then tighten again after installation. This will help minimize tweaking and binding the fan.
- Medium strength thread lock (blue threadlocking compound) on fan mount screws
- For off road, ensure fan blades are protected
- This system uses a EC-5 Connector. If your system uses another type of connector, you'll have to switch connectors, or use an adapter.
Specifications:
- Size: 40x40x28.9mm
- Input Voltage: 11.1V (12V max)
- Lead length: ~170mm (may vary)
- Mounting pattern: M3x32mm square
Comments:
- If you are using single 6 cell pack DO NOT use this system.
- Replacement Hot Racing fan is RAON404FP
This is the Hot Racing Twister Blower clip-on universal heat sink and fan for the 1/8, 1/7 Arrma Felony, infraction limitless, mojave . Kraton BLX, Notorious BLX, Outcast BLX, Senton BLX, Talion BLX, and Typhon BLX or custom projects.
Features:
- 12, 000 RPM Forced airflow over motor heat sink to increase cooling for improved efficiency and performance
- Large 40x40x28mm 7-blade fan
- Clip-on design for simple installation
- Black anodized aluminum heat sink provides efficient heat transfer
- Adapter with EC5
- 12AWG and 24 AWG silicone wire
Requirements:
- Installation
- Recommended to loosen fan screws during installation, then tighten again after installation. This will help minimize tweaking and binding the fan.
- Medium strength thread lock (blue threadlocking compound) on fan mount screws
- For off road, ensure fan blades are protected
- This system uses a EC-5 Connector. If your system uses another type of connector, you'll have to switch connectors, or use an adapter.
Specifications:
- Size: 40x40x28.9mm
- Input Voltage: 11.1V (12V max)
- Lead length: ~170mm (may vary)
- Mounting pattern: M3x32mm square
Comments:
- If you are using single 6 cell pack DO NOT use this system.
- Replacement Hot Racing fan is RAON404FP
